How to Build a Paver Patio: A Step-by-Step Guide to Transform Your Outdoor Space

How to Make an Easy Brick Patio Pattern for Beginners Then spread gravel on the site using a shovel and rake. Concrete pavers are one of the most common choices due to their affordability and durability. They come in a variety of shapes, colors, and textures, allowing you to customize your patio. Patio furniture is a great way to make the space more your own. If you want a classic look, it’s hard to go wrong with either a front swing or rocking chairs. I love Polywood for its weather durability, low maintenance, and beautiful aesthetic.

Lay Bricks Along Layout Lines

My metal bars are lying diagonally in the photo above because I needed to slope my patio in two directions. You can also use the float if there are any spots that you accidentally pulled a piece of gravel through and it made a divot, or your hand hit. You may need to slide the screed back and forth (left to right) to help even the sand out. Next, use a marker to mark a line where you pulled the strings to (this will be a backup just in case you do lose a string line –I had one snap on me). Reminder- due my patio being boxed in on all four sides, my photos show the stakes placed inside the patio area.

So you’ve built your new patio and now you’re looking for some shade.Work front to back and left to right, then tie strings where the other strings meet.This will be the frame or outline of your concrete patio.Once all the stones are laid, align the grout joints using a pry bar or flat bar.

Once you have your design down and your materials ordered, it's helpful to dry lay your slabs out first to check that everything fits together seamlessly. Transform your outdoor living space in just one weekend. The string line should represent the slope and will be your guide throughout the project. You can build your DIY backyard patio in just one weekend with some patience and careful measurements. Here’s how to build a patio you and your family will love.

Solar Sales Salary Guide

To build your DIY patio, you'll need a gravel or limestone paver base, sand, and your choice of patio material. Bricks, pavers, or https://www.sendspace.com/file/6nrdi3 flagstones can all create sturdy and attractive stone patio designs. After compacting the gravel base, it’s time to add a 1-inch layer of sand. This sand serves as a bed for your pavers and helps them stay level. Hammer them in until they are at least a foot into the earth. They should be nice and tight and not move if you pull at them. If you find a lot of larger rocks as you’re digging, I recommend digging several inches deeper in order to remove them. Installing patio pavers will be a little different depending on each situation.